Skip to content

Nationwide · Licensed electricians in 48 states + DC

Brightlane Electric
Call

200 Amp Service Upgrade · Utah

200 Amp Service Upgrade in Utah

A 200 amp service upgrade increases the electricity your home can draw from the utility, replacing the panel and usually the meter base and service entrance cable. It is the common fix when a 60 or 100 amp home adds an EV charger, heat pump or electric range.

Call (877) 370-0920
  • Call now to check electrician availability in your area
  • Independent, licensed electricians
  • Local notes for 2 Utah cities

200 Amp Service Upgrade across Utah

200 Amp Service Upgrade in Salt Lake City, UT

Salt Lake City's winter inversions have pushed many homeowners toward cleaner heat, and swapping a gas furnace for a heat pump, adding an induction range and installing an EV charger often overwhelms the 60 or 100 amp services found in older homes in the Avenues and Sugar House. A 200 amp upgrade usually includes a new meter base and service entrance coordinated with Rocky Mountain Power, and alley-fed homes may need a new mast at the rear.

Older homes often have small services and ungrounded circuits, and finishing a basement is one of the most common reasons to add circuits. EV chargers and heat pumps are increasingly common reasons to upgrade a panel.

200 Amp Service Upgrade in Ogden, UT

Ogden homeowners adding heat pumps, central air, hot tubs or EV chargers often find older homes in East Central and near downtown have 60 or 100 amp services. A 200 amp upgrade usually includes a new meter base and service mast, and because canyon winds can damage masts, the new one should be sturdy and well braced.

Older homes may have knob-and-tube or small services, and many were converted to apartments. Canyon winds can damage service masts and bring trees down on lines, as in the December 2011 windstorm.

What 200 amp service upgrade involves

Most new single-family homes are built with 200 amp service, while many older homes have 60, 100 or 150 amps. Electrification projects add large loads: a Level 2 EV charger can draw 40 amps or more on its own, and heat pumps and induction ranges add more.

The upgrade involves the utility as well as the electrician, because the meter and service drop must be disconnected and reconnected. A load calculation first confirms whether 200 amps is the right size, or whether load management could avoid the upgrade.

Signs to look for

  • 60, 100 or 150 amp service with major loads planned
  • The main breaker trips under heavy use
  • No room for new circuits
  • An electrician's load calculation near capacity
  • An aging meter base or service mast

What moves the price

  • Overhead versus underground service
  • Meter base and mast replacement
  • Distance between the meter and panel
  • Utility requirements and fees
  • Grounding electrode upgrades
  • Permit fees

200 Amp Service Upgrade in Utah: questions

Where in Utah is 200 amp service upgrade common?

Our local notes cover Salt Lake City, Ogden. Salt Lake City's winter inversions have pushed many homeowners toward cleaner heat, and swapping a gas furnace for a heat pump, adding an induction range and installing an EV charger often overwhelms the 60 or 100 amp services found in older homes in the Avenues and Sugar House.

Who issues permits for 200 amp service upgrade in Utah?

The city or county building department where the home is. Salt Lake City: Electrical permits in Salt Lake City come from the city's Building Services division; other cities in the valley run their own. Ogden: Electrical permits inside city limits come from Ogden City's building services; Weber County and nearby cities issue their own.

Do I need 200 amps for an EV charger?

Not always. A load calculation may show that a 100 or 150 amp service can support a charger, especially with a lower charging setting or a load-management device.

How long does a 200 amp upgrade take?

The installation is often one day, but utility scheduling and permits can add days or weeks.

Does the utility charge for a service upgrade?

Some utilities charge fees or require their own work on the service drop. Policies vary, so ask your utility.

Related help in Utah

Electrical Panel Upgrade in UtahKnob-and-Tube Wiring Replacement in Utah200 Amp Service Upgrade in Colorado200 Amp Service Upgrade in Iowa200 Amp Service Upgrade in New Jersey200 Amp Service Upgrade in Oregon200 Amp Service Upgrade in Pennsylvania200 Amp Service Upgrade in Virginia200 Amp Service Upgrade in Washington200 Amp Service Upgrade in WyomingAbout 200 amp service upgrade →

Need 200 amp service upgrade in Utah?

Call now and we connect you with a licensed electrician who serves your ZIP code.

Call (877) 370-0920
Call now