Nationwide · Licensed electricians in 47 states + DC
Call now to check electrician availability in your area
Home Rewiring · Ohio
Rewiring replaces old branch-circuit wiring, such as knob-and-tube, ungrounded cloth-insulated cable or 1960s–70s aluminum branch wiring, with modern grounded copper cable. It can be done room by room, and an electrician will tell you which circuits matter most.
Older city neighborhoods in Cleveland, Columbus and Dayton carry aging wiring, and storms bring outages.
Across the Midwest, homes deal with cold winters, severe thunderstorms and tornado season. Permit offices, utilities and housing stock differ by city, which affects how home rewiring is planned and scheduled. These local guides cover the Ohio cities where we have written specific notes.
Homes in German Village, Victorian Village, Clintonville and the near east side often contain knob-and-tube or ungrounded wiring, sometimes hidden behind later updates. In Columbus, rewiring is usually done during a remodel, before insulating, or when an insurer asks about older wiring.
Utility: AEP Ohio
Cleveland's pre-1930 doubles and Victorians often still have knob-and-tube wiring, sometimes alongside newer circuits added over the years. Rewiring is commonly done during renovations, before insulation is added, or when an insurer asks about older wiring.
Utility: Cleveland Public Power (city-owned) or The Illuminating Company (CEI), depending on address
Victorian and early-1900s homes in the Oregon District, St. Anne's Hill and Dayton View often have knob-and-tube or cloth wiring, along with fuse boxes and decades of add-on circuits. Rewiring is usually done during renovations, before insulating or when an insurer asks.
Utility: AES Ohio
Goodyear Heights and Firestone Park were built quickly as company neighborhoods for rubber workers in the 1910s and 1920s, so many Akron houses share the same original wiring: a few circuits, few outlets per room and, in some homes, knob-and-tube that is still in use. Highland Square and Kenmore homes from the same era are similar.
Utility: Ohio Edison (FirstEnergy)
1. Assessment
Wiring type, condition and circuit layout are documented.
2. Plan and permit
Circuits are prioritized and the work is permitted.
3. Rewire
New cable is fished through walls and ceilings with minimal openings.
4. Inspection and patching
Rough-in and final inspections, then wall openings are closed.
Electricians set their own prices; local permit fees and utility requirements add to these factors.
Permits come from the city or county where the home is. For example: Columbus: Electrical permits in Columbus come from the Department of Building and Zoning Services; suburbs such as Dublin, Westerville and Upper Arlington run their own building departments. Cleveland: Electrical permits in Cleveland come from the city's Department of Building and Housing; suburbs such as Lakewood and Cleveland Heights run their own building departments. Dayton: Inside city limits, electrical permits come from the City of Dayton's Division of Building Inspection; many surrounding communities, such as Trotwood, use Montgomery County Building Regulations. Akron: Akron projects are filed with both the City of Akron and the Summit County Department of Building Standards, which performs the electrical inspections.
Columbus: AEP Ohio. Cleveland: Cleveland Public Power (city-owned) or The Illuminating Company (CEI), depending on address. Dayton: AES Ohio. Akron: Ohio Edison (FirstEnergy).
No. Many homeowners rewire in phases, starting with kitchens, baths and bedrooms.
Aluminum branch wiring can overheat at connections. Approved repairs (such as rated connectors) or replacement reduce the risk; an electrician can advise which fits.
Call now, or send a request and a licensed electrician who serves your ZIP code will contact you.
