Nationwide · Licensed electricians in 48 states + DC
Call now to check electrician availability in your area
Electrical Repair & Troubleshooting · Florida
Dead outlets, flickering lights and tripping breakers usually come from a loose connection, a failed device, an overloaded circuit or a tripped GFCI somewhere upstream. An electrician tests the circuit to find the exact point of failure instead of replacing parts at random.
Florida has some of the highest lightning activity in the country, and hurricane season makes surge protection and generators routine.
Across the Southeast, homes deal with heat, humidity, frequent thunderstorms and hurricane season near the coast. Permit offices, utilities and housing stock differ by city, which affects how electrical repair & troubleshooting is planned and scheduled. These local guides cover the Florida cities where we have written specific notes.
Salt air and humidity are hard on electrical equipment in Miami. Outdoor panels, meter bases, AC disconnects and exterior outlets corrode, and corroded connections can cause intermittent power loss, tripping breakers or overheating.
Utility: Florida Power & Light (FPL)
Jacksonville repair calls often follow storms, when falling trees damage service drops and masts in tree-lined neighborhoods such as Riverside, Avondale and San Marco, and summer heat, which stresses older panels and connections. Federal Pacific panels and aluminum branch wiring in 1960s and 1970s homes are common, and Florida insurers often want them addressed after a four-point inspection.
Utility: JEA (city-owned)
With so many trees over Tallahassee's overhead lines, a common repair call after storms is a service mast, weatherhead or meter base damaged by a falling limb. The City of Tallahassee Utilities owns the line and meter, but the equipment attached to the house is usually the homeowner's to fix, and it generally must be repaired before power is restored.
Utility: City of Tallahassee Utilities (some outlying areas: Talquin Electric Cooperative)
1. Listen and check the easy causes
GFCIs, breakers and recent changes are checked first, since they solve many calls.
2. Trace the circuit
The electrician maps which devices share the circuit and tests where voltage drops.
3. Repair the connection or device
Loose terminals are remade, failed devices replaced and damaged wire sections repaired.
4. Test under load
The circuit is tested with a load so the fix holds up in daily use.
Electricians set their own prices; local permit fees and utility requirements add to these factors.
Permits come from the city or county where the home is. For example: Miami: Permits come from the City of Miami or, in unincorporated areas, Miami-Dade County; other cities in the county have their own building departments. Jacksonville: Jacksonville and Duval County share a consolidated government, and electrical permits come from the City of Jacksonville's Building Inspection Division. Tallahassee: Electrical permits inside the city come from the City of Tallahassee's growth management department; unincorporated Leon County has its own.
Miami: Florida Power & Light (FPL). Jacksonville: JEA (city-owned). Tallahassee: City of Tallahassee Utilities (some outlying areas: Talquin Electric Cooperative).
Often a GFCI elsewhere has tripped, or a connection in an upstream box has failed. Reset every GFCI first; if power does not return, the circuit needs testing.
A brief dip is common when a large motor starts. Hard dimming, or flicker across the whole house, can point to a loose service or neutral connection and should be checked.
The breaker is doing its job. Repeated trips mean an overload, a short or a ground fault that needs to be found, not a breaker to replace with a bigger one.
Call now and we connect you with a licensed electrician who serves your ZIP code.
