Home Rewiring · Washington, DC
Home Rewiring in Washington, DC
Washington rowhomes in Capitol Hill, Petworth and Shaw were mostly built from the late 1800s to the 1930s, and many have been renovated several times. Full renovations often include a full rewire to remove old wiring, add grounding and bring the home up to current code, including AFCI and GFCI protection.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving Capitol Hill, Petworth, Columbia Heights and more
What's different about home rewiring in Washington
Partial rewiring through plaster walls is slower and requires careful planning. Permits come from the DC Department of Buildings, and work must be done by a DC-licensed electrician. Pepco coordinates any meter or service work. Planning the rewire with any service upgrade avoids opening walls twice.
Basement apartments, kitchen remodels, heat pumps and EV chargers are common reasons to upgrade a service. Many homes are in historic districts, which can affect exterior work such as meters, service masts and outdoor equipment.
- Permits in Washington
- Electrical permits in the District are issued by the DC Department of Buildings, and work must be done by a DC-licensed electrician. Historic-district properties may also need review by the Historic Preservation Office.
- Where we connect you
- 69 ZIP codes in Washington, including Capitol Hill, Petworth, Columbia Heights, Shaw, Brookland, Georgetown
Signs it's time to call
- Knob-and-tube or cloth-insulated wiring
- Two-prong outlets throughout
- Aluminum branch wiring
- Frequent tripping or warm devices
- An insurer or home inspector flagged the wiring
How the job usually goes
1. Assessment
Wiring type, condition and circuit layout are documented.
2. Plan and permit
Circuits are prioritized and the work is permitted.
3. Rewire
New cable is fished through walls and ceilings with minimal openings.
4. Inspection and patching
Rough-in and final inspections, then wall openings are closed.
Full details on home rewiring, including what you can safely check yourself.
What moves the price in Washington
Electricians set their own prices. Local permit fees, utility coordination and the age of the home all play a part, along with:
- Home size and number of circuits
- Access through attic, basement or crawl space
- Plaster versus drywall
- Whether the panel is upgraded at the same time
- Patching and painting scope
Stop and call an electrician if
- ✕ Do not cover knob-and-tube with insulation
- ✕ Do not splice new wire onto old wiring
Home Rewiring in Washington: questions
Do I need a permit for home rewiring in Washington?
In most cases, yes. Electrical permits in the District are issued by the DC Department of Buildings, and work must be done by a DC-licensed electrician. Historic-district properties may also need review by the Historic Preservation Office. The electrician normally pulls the permit and arranges the inspection.
Do I have to rewire the whole house at once?
No. Many homeowners rewire in phases, starting with kitchens, baths and bedrooms.
Is aluminum wiring dangerous?
Aluminum branch wiring can overheat at connections. Approved repairs (such as rated connectors) or replacement reduce the risk; an electrician can advise which fits.
What electrical issues are common in Washington homes?
Electricians in Washington most often see: small services and old wiring in rowhomes; service upgrades for basement units and heat pumps; historic-district rules for exterior equipment.
More electrical help in Washington
Home Rewiring in other cities
Need home rewiring in Washington?
Call now, or send a request and a licensed electrician who serves your ZIP code will contact you.