Home Rewiring · Boston, MA
Home Rewiring in Boston, MA
Boston triple-deckers, Victorians and brownstones often have knob-and-tube or early cloth-insulated wiring. Rewiring is commonly paired with insulation upgrades, kitchen and bath remodels or a heat-pump conversion.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving Dorchester, Jamaica Plain, South Boston and more
What's different about home rewiring in Boston
Plaster walls and multi-unit layouts make the work slower than in newer homes, and occupied units may need phased scheduling. A Massachusetts-licensed electrician pulls the permit from the Inspectional Services Department, and the inspector checks the work before walls are closed. Insulation programs often require knob-and-tube to be evaluated or replaced first, since insulation should not be packed around it. Insurers may ask about it as well. Combining a rewire with insulation, a remodel or a heat-pump install means walls are only opened once.
Massachusetts heat-pump incentives are driving a wave of electrification, and most older homes need a service upgrade before a cold-climate heat pump can be installed. Nor'easters and ice also bring outages.
- Permits in Boston
- In Boston, electrical permits are issued by the Inspectional Services Department, and work must be done by a Massachusetts-licensed electrician.
- Where we connect you
- 36 ZIP codes in Boston, including Dorchester, Jamaica Plain, South Boston, Roslindale, Charlestown, West Roxbury
Signs it's time to call
- Knob-and-tube or cloth-insulated wiring
- Two-prong outlets throughout
- Aluminum branch wiring
- Frequent tripping or warm devices
- An insurer or home inspector flagged the wiring
How the job usually goes
1. Assessment
Wiring type, condition and circuit layout are documented.
2. Plan and permit
Circuits are prioritized and the work is permitted.
3. Rewire
New cable is fished through walls and ceilings with minimal openings.
4. Inspection and patching
Rough-in and final inspections, then wall openings are closed.
Full details on home rewiring, including what you can safely check yourself.
What moves the price in Boston
Electricians set their own prices. Local permit fees, utility coordination and the age of the home all play a part, along with:
- Home size and number of circuits
- Access through attic, basement or crawl space
- Plaster versus drywall
- Whether the panel is upgraded at the same time
- Patching and painting scope
Stop and call an electrician if
- ✕ Do not cover knob-and-tube with insulation
- ✕ Do not splice new wire onto old wiring
Home Rewiring in Boston: questions
Do I need a permit for home rewiring in Boston?
In most cases, yes. In Boston, electrical permits are issued by the Inspectional Services Department, and work must be done by a Massachusetts-licensed electrician. The electrician normally pulls the permit and arranges the inspection.
Do I have to rewire the whole house at once?
No. Many homeowners rewire in phases, starting with kitchens, baths and bedrooms.
Is aluminum wiring dangerous?
Aluminum branch wiring can overheat at connections. Approved repairs (such as rated connectors) or replacement reduce the risk; an electrician can advise which fits.
What electrical issues are common in Boston homes?
Electricians in Boston most often see: knob-and-tube in triple-deckers and Victorians; service upgrades for heat pumps; multi-unit services and meter banks in older buildings.
More electrical help in Boston
Home Rewiring in other cities
Need home rewiring in Boston?
Call now, or send a request and a licensed electrician who serves your ZIP code will contact you.