EV Charger Installation · Bakersfield, CA
EV Charger Installation in Bakersfield, CA
Bakersfield garages can get extremely hot in summer, so EV charger equipment ratings and wire sizing matter, and some chargers slow down when hot. Homes in the northwest and southwest often have solar, so the electrician should consider the whole panel, including the solar breaker, before adding a charger circuit.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving Westchester, Oleander-Sunset, Downtown and more
What's different about ev charger installation in Bakersfield
PG&E offers EV rate plans that make overnight charging cheaper. A load calculation decides whether the existing service can carry the charger. Permits come from the City of Bakersfield or Kern County. Ask whether the charger can be wall-mounted away from direct sun if it is outside.
Older homes often have small services sized long before central air, and adding a larger AC system, solar or an EV charger frequently requires an upgrade. Rooftop solar is common in newer subdivisions.
- Permits in Bakersfield
- Electrical permits inside city limits come from the City of Bakersfield's building division; unincorporated areas are permitted by Kern County. California electrical contractors are licensed by the CSLB.
- Where we connect you
- 22 ZIP codes in Bakersfield, including Westchester, Oleander-Sunset, Downtown, Rosedale, Seven Oaks, Northwest Bakersfield
Signs it's time to call
- You bought or ordered an EV
- Charging from a regular outlet is too slow
- Two EVs in one household
- A new garage or driveway parking spot
How the job usually goes
1. Site and load check
Panel capacity, distance and mounting location are confirmed.
2. Permit
The installation is permitted; rebates may require the permit number.
3. Install
The 240V circuit and charger or receptacle are installed and tested.
4. Inspection
The local inspector signs off.
Full details on ev charger installation, including what you can safely check yourself.
What moves the price in Bakersfield
Electricians set their own prices. Local permit fees, utility coordination and the age of the home all play a part, along with:
- Charger amperage
- Distance from panel to charger
- Indoor versus outdoor or detached garage
- Whether a panel upgrade or load management device is needed
- Permit fees and available rebates
Stop and call an electrician if
- ✕ Do not charge from an extension cord
- ✕ Do not install a 240V outlet yourself
EV Charger Installation in Bakersfield: questions
Do I need a permit for ev charger installation in Bakersfield?
In most cases, yes. Electrical permits inside city limits come from the City of Bakersfield's building division; unincorporated areas are permitted by Kern County. California electrical contractors are licensed by the CSLB. The electrician normally pulls the permit and arranges the inspection.
Do I need a panel upgrade for an EV charger?
Not always. A load calculation shows whether the existing service can carry the charger; load management devices can avoid an upgrade in some homes.
Hardwired or plug-in charger?
Hardwired is often preferred for higher amperage and outdoor locations. A plug-in charger on a NEMA 14-50 outlet is easier to replace.
What electrical issues are common in Bakersfield homes?
Electricians in Bakersfield most often see: aC circuits under extreme summer heat; panel upgrades for solar and EV chargers; older wiring in pre-1950 homes.
More electrical help in Bakersfield
EV Charger Installation in other cities
Guides
Need ev charger installation in Bakersfield?
Call now, or send a request and a licensed electrician who serves your ZIP code will contact you.