Electrical Panel Upgrade · Boston, MA
Electrical Panel Upgrade in Boston, MA
Massachusetts heat-pump incentives have made service upgrades one of the most common electrical projects in Boston. Cold-climate heat pumps, induction ranges and EV chargers often need more capacity than an older 60 or 100 amp service provides.
- Call now to check electrician availability in your area
- Independent, licensed electricians
- Serving Dorchester, Jamaica Plain, South Boston and more
What's different about electrical panel upgrade in Boston
In triple-deckers each unit may have its own small service and meter, so the upgrade can involve the meter bank and the building's service entrance. Work requires a Massachusetts-licensed electrician and a permit from the Inspectional Services Department, with Eversource handling the utility side. A load calculation will show whether the whole service needs to be upgraded or whether a smaller change will do.
Massachusetts heat-pump incentives are driving a wave of electrification, and most older homes need a service upgrade before a cold-climate heat pump can be installed. Nor'easters and ice also bring outages.
- Permits in Boston
- In Boston, electrical permits are issued by the Inspectional Services Department, and work must be done by a Massachusetts-licensed electrician.
- Where we connect you
- 36 ZIP codes in Boston, including Dorchester, Jamaica Plain, South Boston, Roslindale, Charlestown, West Roxbury
Signs it's time to call
- 60 or 100 amp service with plans for an EV charger, heat pump or addition
- Federal Pacific, Zinsco or fuse box equipment
- No open spaces for new circuits
- Rust, scorch marks or a warm panel cover
- Breakers that trip often under normal use
How the job usually goes
1. Load calculation
The electrician sizes the service from your existing and planned loads.
2. Permit and utility coordination
The permit is pulled and the utility schedules disconnect and reconnect.
3. Install the panel and service parts
New panel, breakers, grounding and bonding, and service conductors or meter base if needed.
4. Inspection
The local inspector checks the work before or after power is restored, depending on the jurisdiction.
Full details on electrical panel upgrade, including what you can safely check yourself.
What moves the price in Boston
Electricians set their own prices. Local permit fees, utility coordination and the age of the home all play a part, along with:
- Amperage (100, 150, 200 or more)
- Whether the meter base and service entrance also change
- Panel location changes
- Grounding and bonding upgrades
- Permit and utility fees
- Wall repair around a recessed panel
Stop and call an electrician if
- ✕ Never remove the panel cover
- ✕ Do not add or swap breakers yourself
Electrical Panel Upgrade in Boston: questions
Do I need a permit for electrical panel upgrade in Boston?
In most cases, yes. In Boston, electrical permits are issued by the Inspectional Services Department, and work must be done by a Massachusetts-licensed electrician. The electrician normally pulls the permit and arranges the inspection.
How do I know if I need a panel upgrade?
If you have 100 amps or less and are adding an EV charger, heat pump or electric range, or your panel is a Federal Pacific, Zinsco or fuse box, ask an electrician for a load calculation.
How long is the power off during a panel upgrade?
Usually most of one working day, depending on the scope and how quickly the utility reconnects.
Do I need a permit for a panel upgrade?
Yes, in essentially every US jurisdiction. The electrician pulls it and schedules the inspection.
What electrical issues are common in Boston homes?
Electricians in Boston most often see: knob-and-tube in triple-deckers and Victorians; service upgrades for heat pumps; multi-unit services and meter banks in older buildings.
More electrical help in Boston
Electrical Panel Upgrade in other cities
Guides
Need electrical panel upgrade in Boston?
Call now, or send a request and a licensed electrician who serves your ZIP code will contact you.